steam cylinder
英 [stiːm ˈsɪlɪndə(r)]
美 [stiːm ˈsɪlɪndər]
网络 汽缸
双语例句
- The feasibility of the application of microarc oxidation technique to the treatment of inner surface of steam cylinder was studied by measuring the change of inner diameter, roughness and bench test.
通过研究缸体的内径变化、陶瓷层的粗糙度和台架试验探讨将微弧氧化技术应用于铝制小型汽油机缸体的内表面处理的可行性。 - For reducing starting time and oil, according to the real condition of turbine and boiler in our plant, the process of using auxiliary steam to warm the high pressure cylinder was employed.
为了缩短启动时间，结合我厂机炉实际情况，采取了利用辅汽对高缸预暖，进一步节油。 - The transformation of condensate valves in the steam system of double cylinder paper machines
疏水阀在双缸纸机蒸汽系统中的改造 - Study on Measure for Steam Cylinder Shim Block of Positional Tolerance and Wire Profile Tolerance
汽缸垫片位置度与线轮廓度测量研究 - Steam in a cylinder expands to push a piston outward.
气缸中的蒸汽膨胀并推动活塞向外运动。 - Through analysis, it is considered, that steam leak exists in HP cylinder, and the position of leakage is pointed out.
在汽轮机改造后的性能试验中，发现高压缸抽汽温度过高，通过分析认为缸内存在漏汽，并指出了漏汽的位置。 - Improvement of Synthetic Steam Cylinder Oil Production Process
合成蒸汽汽缸油生产工艺的改进 - The fault problem existing on No. 2 bearing of one K-200-130-3 type 200 MW steam turbine was tested and studied, the result showed that the main cause of fault was the transverse residual force resulting from the unsymmetrical steam admission of high pressure cylinder nozzles.
针对某台K-200-130-3型200MW汽轮机2号轴承故障问题进行了试验研究，结果表明引发故障的主要原因是高压缸喷嘴不对称进汽产生的横向剩余力。 - Influence of Steam Excitation in 200 MW Steam Turbine's HP Cylinder on Stability of Rotor line
200MW汽轮机高压缸中汽流激振对轴系稳定性的影响 - A New Method Based on Finite Volume Method to Estimate Axial Thermal Expansion of Steam Turbine Cylinder
一种基于有限体积法计算汽轮机汽缸轴向膨胀的新方法 - Thermal stress rectification of steam cylinder deformation
汽缸变形的热应力矫正 - Numerical Analysis of Temperature Differences in Steam Turbine Cylinder during Start-Up and Shutdown
汽轮机启、停过程中汽缸温差的数值计算 - Test Analysis and Treatment of Inner Steam Leak in Turbine HP Cylinder
汽轮机高压缸内部漏汽的试验分析与处理 - Exploration about the processing method of large-scale steam turbine cylinder
大型汽轮机汽缸加工方法的探讨 - This paper briefly introduced the process to experiment on and produce steam cylinder cover of lower speed diesel engine used in the ship by ESR casting, and analyzed the quality of products.
简要介绍采用电渣熔铸方法试制船用低速柴油机汽缸盖的工艺路线，并对产品的质量进行了分析。 - Detailed introduce the basic device, technique preparation and operation process for tight stud bolts of the steam turbine cylinder horizontal flange by electricity heating, and bring up the important point of each attention.
介绍汽缸中分面电加热拧紧螺栓的基本装置、技术准备、操作过程等，并提出注意要点。 - Strength Calculation and Life Expectancy Evaluation of Steam Turbine Valve and Cylinder Casings
汽轮机阀壳与汽缸强度计算及寿命评估 - Abstract The Steam excitation coefficients at shroudings and diaphragms, and in labyrinth glands of shaft end of demestic-made 200 MW steam turbine's HP cylinder are calculated by using the method in Reference [ 1].
本文应用文献〔1〕中的方法对国产200MW汽轮机高压缸围带、隔板及轴端的迷宫汽封中的汽流激振系数进行了计算。 - High speed cooling optimization plan of steam turbine cylinder
汽轮机汽缸快速冷却优化方案 - Service life loss of high temperature bolts on joint face of the steam cylinder and analysis for safe application performance thereof
汽缸结合面高温螺栓寿命损耗及其安全使用性能分析 - Through analysis of performance test for high temperature bolts on joint face of the steam cylinder, it is believed that the main factors affecting the safe application performance of high temperature bolts are undue and nonhomogeneous pretightening loads.
通过对汽缸结合面高温螺栓的性能试验分析，认为预紧力过大和预紧力不均匀是影响高温螺栓安全使用性能的主要因素。 - The forced cooling device of steam turbine can cool the cylinder effectively and rapidly, so as to shorten the maintenance duration and improve the availability of generating units.
针对汽轮机停机后需加速冷却的问题，提出有效、快捷冷却汽轮机汽缸的快速冷却技术，以缩短检修工期及提高机组利用率。 - Using copper mesh gaskets to fill gaps of steam turbine cylinder joins
铜网垫片在汽轮机汽缸接合面上的应用实践 - Repair welding for cracks on No.1 steam turbine cylinder in Nanhai A Power Plant
南海市发电A厂1号机汽缸裂纹的补焊处理 - Tipped Shell Reamer for Finishing the Hole of Steam Cylinder
加工汽缸内孔用镶片套式精铰刀 - Differential pressure Security Control of the Last stage Blades of a Reheat Extraction Steam Turbine Intermediate pressure Cylinder
再热抽汽式汽轮机中压缸末级叶片压差保护控制 - This paper analyzes the loss in through-flow area which has an effect on steam cylinder efficiency, and also it discusses the fundamental principle and advanced technology of steam turbine through-flow area modification.
本文对影响汽轮机组缸效率的通流部分的损失进行了分析，论述了汽轮机通流改造的基本原理和先进技术。 - For example, the steam cylinder bolt for ultra-supercritical turbine requires not only enhanced high temperature strength and ductility, but also good corrosive and wearing resistance.
例如：用于超超临界汽轮机组的汽缸螺栓，不但要求具有足够高的高温强度和韧性，而且要求良好的抗腐蚀和耐磨性能。 - And the industrial steam turbine cylinder is taken for example to be certified in this system.
并以工业汽轮机汽缸为例，在该系统下进行应用验证。